Product | Himalayan Adhesives

TILE ADHESIVE S1

Home /
Tile and Stone Fixing Solutions /
TILE ADHESIVE S1

TILE ADHESIVE S1

HIMALAYAN ADHESIVE TILE ADHESIVE S1 Is a Pre-mix Cementitious-Polymer-Based-powder, containing Portland cement and sand, which can be mixed with water for installing small and medium size ceramic floor tiles in interior areas using the thin-set method of installation.

Qty. 20Kilogram

Product Applications

Product Specification

Technical Specifications

#	Specification	Description
1	SIZE UPTO IN FEET	2ft x 2ft
2	TYPE	Ceramic
3	APPLICATION AREA CLASSIFICATION	Indoor Floor
4	SURFACE	Concréte, Cement Mortar, Beds, Cement Plaster
5	COVERAGE	30-35 sq. at 3 mm
6	HEIGHT IN FEET	NA
7	OPEN TIME	15 Minutes
8	POT LIFE	30 Minutes
9	WATER RATIO	30-35% per 20 Kg bag
10	SETTING TIME	24 Hours
11	APPLICATION TEMPERATURE	5-50 Degree Celsius
12	BULK DENSITY	1400-1600 KG/m3
13	COLOUR	GREY
14	TENSILE ADHESION DRY CONDITION	.65 MPa
15	TENSILE ADHESION WET CONDITION	.61 MPa
16	SHEAR ADHESION DRY CONDITION	1.20 N/mm2
17	SHEAR ADHESION HEAT AGING	NA
18	SHEAR ADHESION WET CONDITION	NA
19	SLIP AVERAGE	NA
20	DEFORMABLE ADHESIVE	NA
21	FOLLOWING STANDARD	ANSI A 118.1 T-EN 12004 / ISO 13007: C1T

SIZE UPTO IN FEET

2ft x 2ft

TYPE

Ceramic

APPLICATION AREA CLASSIFICATION

Indoor Floor

SURFACE

Concréte, Cement Mortar, Beds, Cement Plaster

COVERAGE

30-35 sq. at 3 mm

HEIGHT IN FEET

OPEN TIME

15 Minutes

POT LIFE

30 Minutes

WATER RATIO

30-35% per 20 Kg bag

SETTING TIME

24 Hours

APPLICATION TEMPERATURE

5-50 Degree Celsius

BULK DENSITY

1400-1600 KG/m3

COLOUR

GREY

TENSILE ADHESION DRY CONDITION

.65 MPa

TENSILE ADHESION WET CONDITION

.61 MPa

SHEAR ADHESION DRY CONDITION

1.20 N/mm2

SHEAR ADHESION HEAT AGING

SHEAR ADHESION WET CONDITION

SLIP AVERAGE

DEFORMABLE ADHESIVE

FOLLOWING STANDARD

ANSI A 118.1 T-EN 12004 / ISO 13007: C1T

Specifications

Areas of Application

• Fixing ceramic, vitrified, and natural stone tiles on floors and walls.
• Use in both indoor and outdoor applications.
• Suitable for bathrooms, kitchens, swimming pools, terraces, and other wet or dry areas.

Surface Preparation

• Ensure the surface is clean, dry, level, and free from dust, oil, grease, or loose particles.
• Repair any cracks or uneven areas before application.
• Avoid application on surfaces with standing water or visible dampness.

Mixing Instructions

• Mix the adhesive powder with clean water as per the manufacturer’s ratio to form a smooth, lump-free paste.
• Stir well to achieve a homogeneous consistency.
• Do not add excess water as it may weaken the adhesive properties.
• Let the mixture rest for a few minutes before application.

Application Method

• Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
• Hold the trowel at a 45-degree angle to form ridges for improved bonding.
• Place tiles into the adhesive and gently press and twist for full contact.
• Use tile spacers to maintain uniform spacing.
• Adjust tiles while the adhesive is still wet.
• Clean off excess adhesive immediately.
• Allow adhesive to cure as per manufacturer’s recommended time before grouting.

Storage & Shelf Life

• Store in a cool, dry place, away from direct sunlight and moisture.
• Keep the product in its original, tightly sealed packaging.
• Shelf life is typically 12 months from the date of manufacture under proper storage conditions.

Packaging

Available in:20kg

Safety & Precautions

• Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
• Ensure proper ventilation during application.
• Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
• Do not ingest or handle with food. Seek immediate medical help if swallowed.
• Clean tools immediately after use to prevent hardening.
• Keep out of reach of children and pets.
• Dispose of unused product and packaging as per local environmental regulations.
• Always check the compatibility of the adhesive with your specific tile and surface type.