TILE ADHESIVE S2
- Home /
- Tile and Stone Fixing Solutions /
- TILE ADHESIVE S2
TILE ADHESIVE S2
HIMALAYAN ADHESIVE TILE ADHESIVE S2 is floor and wall tile adhesive with higher adhesive strength, it is a smooth and creamy thin-set Adhesive to be used for installing small to medium format ceramic wall and floor tiles in interior areas.
Product Specification
| # | Specification | Description |
|---|---|---|
| 1 | SIZE UPTO IN FEET | 4ft x 2ft |
| 2 | TYPE | Vitrified & Ceramic |
| 3 | APPLICATION AREA CLASSIFICATION | Indoor Floor, Wall & Stairs |
| 4 | SURFACE | Concrete, Cement Mortar, Beds, Cement Plaster |
| 5 | COVERAGE | 30-35 sq. at 3 mm |
| 6 | HEIGHT IN FEET | 6 Ft |
| 7 | OPEN TIME | 30 Minutes |
| 8 | POT LIFE | 30 Minutes |
| 9 | WATER RATIO | 30-35% per 20 Kg bag |
| 10 | SETTING TIME | 24 Hours |
| 11 | APPLICATION TEMPERATURE | 5-50 Degree Celsius |
| 12 | BULK DENSITY | 1400-1600 KG/m3 |
| 13 | COLOUR | GREY |
| 14 | TENSILE ADHESION DRY CONDITION | .75 MPa |
| 15 | TENSILE ADHESION WET CONDITION | .74 MPa |
| 16 | SHEAR ADHESION DRY CONDITION | 1.28 N/mm2 |
| 17 | SHEAR ADHESION HEAT AGING | NA |
| 18 | SHEAR ADHESION WET CONDITION | NA |
| 19 | SLIP AVERAGE | .21 mm |
| 20 | DEFORMABLE ADHESIVE | 3.10 mm |
| 21 | FOLLOWING STANDARD | ANSI A 118.1 T - EN 12004 / ISO 13007: CIT |
4ft x 2ft
Vitrified & Ceramic
Indoor Floor, Wall & Stairs
Concrete, Cement Mortar, Beds, Cement Plaster
30-35 sq. at 3 mm
6 Ft
30 Minutes
30 Minutes
30-35% per 20 Kg bag
24 Hours
5-50 Degree Celsius
1400-1600 KG/m3
GREY
.75 MPa
.74 MPa
1.28 N/mm2
NA
NA
.21 mm
3.10 mm
ANSI A 118.1 T - EN 12004 / ISO 13007: CIT
Specifications
Areas of Application
• Fixing ceramic, vitrified, and natural stone tiles on floors and walls.
• Use in both indoor and outdoor applications.
• Suitable for bathrooms, kitchens, swimming pools, terraces, and other wet or dry areas.
Surface Preparation
• Ensure the surface is clean, dry, level, and free from dust, oil, grease, or loose particles.
• Repair any cracks or uneven areas before application.
• Avoid application on surfaces with standing water or visible dampness.
Mixing Instructions
• Mix the adhesive powder with clean water as per the manufacturer’s ratio to form a smooth, lump-free paste.
• Stir well to achieve a homogeneous consistency.
• Do not add excess water as it may weaken the adhesive properties.
• Let the mixture rest for a few minutes before application.
Application Method
• Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
• Hold the trowel at a 45-degree angle to form ridges for improved bonding.
• Place tiles into the adhesive and gently press and twist for full contact.
• Use tile spacers to maintain uniform spacing.
• Adjust tiles while the adhesive is still wet.
• Clean off excess adhesive immediately.
• Allow adhesive to cure as per manufacturer’s recommended time before grouting.
Storage & Shelf Life
• Store in a cool, dry place, away from direct sunlight and moisture.
• Keep the product in its original, tightly sealed packaging.
• Shelf life is typically 12 months from the date of manufacture under proper storage conditions.
Packaging
Available in:20kg
Safety & Precautions
• Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
• Ensure proper ventilation during application.
• Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
• Do not ingest or handle with food. Seek immediate medical help if swallowed.
• Clean tools immediately after use to prevent hardening.
• Keep out of reach of children and pets.
• Dispose of unused product and packaging as per local environmental regulations.
• Always check the compatibility of the adhesive with your specific tile and surface type.
Feature & Benefit
High Bond Strength
No Shrinkage & Cracks
Cost Effective
High Coverage
No Curing
Premixed-Ready-To-Use
Zero Wastage
Time Saving
Heat Resistant
Cleaniness
